Calculator
Compute & PCB Design
Selection of the core processing unit and custom carrier board requirements.
COTS SoM Integration
$5,000 - $8,000Integration of standard SoM (e.g., Jetson Nano/Orin, RPi CM4) on custom carrier.
High-Density Custom PCB
$12,000 - $20,000Custom schematic & layout, 6+ layers, high-speed interfaces (PCIe, MIPI).
FPGA / ASIC Coprocessor
$15,000 - $30,000Hardware acceleration logic for specific specialized workloads.
Optics & Sensors
Camera selection, sensor drivers, and calibration.
Single Standard Sensor
$2,000 - $4,000Basic USB or MIPI CSI-2 driver implementation (IMX series).
Multi-Camera Array
$8,000 - $15,000Synchronization of 2+ cameras, stereo depth setup, or stitching.
Specialty (Thermal/LiDAR)
$10,000 - $18,000Integration of non-visible spectrum sensors or 3D point cloud data.
Mechanical & Enclosure
Physical housing, thermal management, and ruggedization.
Modified Off-the-Shelf
$1,500 - $3,000CNC machining cuts into a standard aluminium or plastic enclosure.
Custom 3D Print / Prototyping
$3,000 - $6,000Rapid prototyping of custom geometry for fit-checks.
IP67 / Rugged Design
$12,000 - $25,000Waterproof, dustproof design, passive thermal analysis & heatsink design.
Power & Connectivity
Battery management and wireless communication.
PoE / Wall Power
$1,000 - $2,500Standard DC jack or Power over Ethernet regulation.
Custom Battery Management
$6,000 - $10,000Li-Ion/Li-Po charging logic, fuel gauging, safety circuits.
Cellular / LoRa / GNSS
$5,000 - $9,000Integration of 4G/5G modems, antennas, and SIM management.
AI & Firmware
BSP, OS configuration, and AI model optimization.
Custom BSP / OS Build
$8,000 - $15,000Yocto or custom Linux kernel configuration, device tree modification.
Model Optimization (TensorRT/TFLite)
$5,000 - $10,000Quantization and pruning of existing models for edge deployment.
Full Application Pipeline
$15,000 - $35,000End-to-end application logic, cloud connectivity, OTA updates.
Compliance & Mfg
Preparation for certification and mass manufacturing.
EMI/EMC Pre-Scan Support
$4,000 - $8,000Design review and lab time to mitigate emissions before official testing.
Manufacturing Test Fixture
$8,000 - $15,000Automated bed-of-nails tester for QA on the assembly line.
