ShelfCam System – Nexus + 4 Cameras
$999.00
ShelfCam Nexus Only
The Hellbender ShelfCam system is an array of connected cameras and sensors that continually monitor and push data up to a customer’s desired endpoint. Typical use cases involve hourly monitoring across retail or warehouse applications, particularly where goods are of higher value. ShelfCam devices are connected to a Nexus hub and have a many to one relationship. Additional ShelfCam modules can be purchased separately.
Designed and assembled in USA
All Products are Pre-orders only
Products are expected to ship by late summer. For quantities great than 50, please Contact Us. Warranty & Returns.
ShelfCam Specifications
| Processing | Raspberry Pi Zero 2W – Quad Core ARM A53 @ 1GHz |
| Power | 48VDC nominal (provided through RJ-45 connector) |
| Communication | Primary: 10BASE-T1S Ethernet Implementation Specific: Wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac (station and AP modes available) Bluetooth 5.0 |
| Miscellaneous | Integrated LED Illumination (single housing only) Real Time Clock – Micro Crystal RV-3028 IMU – TDK IIM-42652 Temperature, Pressure, Relative Humidity – Bosch BME-280 RGB status LED Power indicator LED Passively cooled housing for ruggedness and durability |
| Inputs/Outputs | 2 x RJ-45 Connectors (data and power passthrough) |
| Software | Comes with a default software image supported by REST API and web configuration GUI |
| Environment | Recommended operating temperature -20 to 65° C |
| Optional Accessories | Imagers and Field of View can be changed upon request Housing can be customized upon request Single housing and remote mount camera options available upon request |
Hellbender products trusted by:
Nexus Specifications
| Processing | Primary: Raspberry Pi CM4 SOM Quad Core ARM A72 @ 1.8GHz Power Control and Peripherals: Raspberry Pi RP2350A microcontroller Dual Cortex M33 @ 150MHz |
| Power | 48VDC nominal |
| Communication | Primary: 10/100/1000 Ethernet Implementation Specific: Wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac (station and AP modes available) Bluetooth 5.0 |
| Miscellaneous | M.2 M-Key (for additional storage or AI acceleration) EEPROM (1 Kbit x 8) onboard, programmable by I2C IMU onboard – TDK IIM-42652 Temperature, Pressure, Relative Humidity – Bosch BME-280 RGB status LED Power indicator LED Reset button Passively cooled housing for ruggedness and durability |
| Inputs/Outputs | 1 x RJ-45 Ethernet 2 x Power connectors 4 x Camera links |
| Software | Comes with a default software image supported by REST API and web configuration GUI |
| Environment | Recommended operating temperature -20 to 65° C |
| Optional Accessories | Housing can be customized upon request |
Camera Feature Diagram
Nexus Feature Diagram
Camera (Single Housing) Dimensional Drawing
Camera (Remote Mount) Dimensional Drawing
Above – Remote mount camera enclosure, Below – Primary electronics enclosure
Nexus Dimensional Drawing
Operation Notes
WARNINGS
- This product uses non-standard RJ-45 pinouts for camera interconnects which could cause damage if connected to a standard Ethernet connection.
- This product should only be connected to the specified 48VDC power supply.
- The RTC coin cell can use non-rechargeable cells.
- This product should be operated in a well-ventilated environment, and if used inside a case, the case should have appropriate cooling capabilities or else not be sealed.
- This product should be placed on a non-conductive surface in use and should not be contacted by conductive items.
- The connection of incompatible devices to the various connectors may affect compliance and result in damage to the unit and invalidate the warranty.
- All peripherals used with this product should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met.
SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
- Do not expose to water, moisture, or place on a conductive surface while in operation.
- Avoid mechanical or electrical damage to the printed circuit board and connectors.
- Avoid handling the printed circuit board while powered and only handle the edges to minimize the risk of ESD.
